Mesquite Concrete Lifting
Mudjacking in Mesquite, TX
Mudjacking in Mesquite, TX pumps cement slurry under sunken slabs to lift them back to grade. Free estimates, no tear-out.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Mesquite and nearby communities.
Mudjacking pumps a cement-based slurry under a slab to lift it. It's been the standard fix for sunken concrete for decades, and it still makes sense for larger slabs where a lot of soil has washed or shifted away over time.
Older Mesquite driveways built before modern soil-stabilization practices tend to have exactly that: a substantial void from years of clay soil movement. Mesquite Concrete Lifting reaches for mudjacking on those bigger jobs where the volume under the slab calls for it.
What's included
What's Included With Mudjacking
Optional Customer prep
- Typically included — Drilling pattern laid out across the affected slab - Slurry mix pumped under pressure to fill the void -.
- Continuous lift monitoring during pumping — Hole patching with hydraulic cement.
- Surface sealer applied after cure
- Extended cure-time scheduling for heavier vehicle loads
- Keep vehicles off the slab through the cure window
- Point out any past patch attempts on the same slab
Want a clearer scope?
Get a Free EstimateHow it works
How Our Mudjacking Process Works
Step 1Site check
Confirm slab size and estimate void volume.
Step 2Drill pattern
Holes spaced to reach the full void area.
Step 3Slurry pump
Cement-based mix pumped in stages under pressure.
Step 4Lift monitoring
Crew checks rise with a level as slurry fills the void.
Step 5Hole patch
Access points sealed with hydraulic cement.
Step 6Cleanup
Jobsite swept and slurry overflow cleared.
Timeline
How Long Does a Mudjacking Take?
- 01
Stage 1
Mudjacking takes longer to cure than foam because of the slurry mix.
- 02
Drilling and pumping
2–4 hours - 03
Initial set
a few hours after pumping
- 04
Cure before heavy use
24 hours
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Mudjacking
Before 
After
FAQs
Mudjacking FAQs
What's the difference between mudjacking and foam injection?
Mudjacking uses a cement-based slurry pumped through larger holes; foam uses a lightweight expanding polymer through smaller ones. Mud generally costs less per job but needs a longer cure. Foam cures fast but costs more per pound of lift.
Will foam lifting work on a slab that's been sinking for years?
Sometimes, but a slab that's been dropping for years usually has a bigger void that mudjacking fills more efficiently. Foam is better suited to smaller, more precise lifts.
Is mudjacking or foam better?
Neither wins outright. Mudjacking suits large slabs with big voids; foam suits smaller areas needing a fast return to use. The right call depends on your slab, not brand preference.
How long will mudjacking hold up?
A properly filled void with stable soil underneath typically holds for years. Continued clay soil movement nearby can eventually call for a touch-up.
Next step
Get a Mudjacking Estimate in Mesquite
Call +1 (254) 848-0148 for a free mudjacking estimate on your slab. Home | Contact | Polyurethane Foam Lifting
More services
Other Concrete Lifting services
Concrete Lifting
Concrete lifting in Mesquite, TX raises sunken slabs back to grade with mudjacking or foam. Free estimates, no full tear-out.
Concrete Leveling
Concrete leveling in Mesquite, TX corrects sloped or uneven slabs across driveways, patios, and walkways. Free estimates.
Polyurethane Foam Lifting
Polyurethane foam lifting in Mesquite, TX raises slabs fast with small entry holes. Same-day cure, free estimates.
Ask about Mudjacking
Tell us about the project and how to reach you.